Tektronix MSO 4 B Serie Manual De Inicio Rápido página 15

Characteristic
Operating altitude
Power requirements
Characteristic
Power source voltage
Power source frequency
Power consumption
Input signal requirements
Keep the input signals within allowed limits to ensure the most accurate measurements and prevent damage to the analog and digital
probes or instrument.
Make sure that input signals connected to the MSO instrument are within the following requirements.
Input
Analog input channels, 1 MΩ setting, maximum input voltage at BNC
Analog input channels, 50 Ω setting, maximum input voltage at BNC
Digital input channels, maximum input voltage range at digital inputs
Ref In maximum input voltage at BNC (rear panel)
Aux In trigger input
Secure (lock) the instrument
Lock an instrument to a test bench or equipment rack to prevent property loss.
To secure the instrument to a workbench, rack, or other location, attach a standard laptop security lock to the rear panel of the instrument.
Powering the instrument
Use this procedure to connect the instrument to line power and power on and off the instrument. Always connect the instrument to AC
power using the power cord that shipped with the instrument.
Before you begin
Use the AC power cord that shipped with your instrument.
Procedure
1. Connect the supplied power cord to the instrument power connector on the back of the instrument.
4 Series B Mixed Signal Oscilloscopes MSO44B and MSO48B Quick Start Manual
Description
Up to 3000 meters (9842 feet)
Description
100 V - 240 V , ±10%, single phase
AC RMS
50/60 Hz, 100-240 V
400 W maximum
Description
300 V
RMS
5 V
RMS
Observe probe ratings: TLP058; ±42 V
7 V
PP
≤300 V
RMS
Preface
P
15