Descargar Imprimir esta página

Tektronix MSO 4 B Serie Manual De Inicio Rápido página 49

Osciloscopios de señal combinada

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Select a trigger from the Trigger Type list. The trigger type sets what fields are available in the menu and also updates the illustration
to show a graphic of the trigger type.
To trigger on a bus, you must first add the bus to the Waveform view. See
Note: Triggering on buses other than Parallel requires purchasing and installing serial trigger and analysis options.
3. Select the other fields and panels to refine the trigger conditions. The menu fields and trigger graphic updates as you make changes to
the trigger settings. Displayed fields depend on the selected trigger type. Selection changes take effect immediately.
4. Tap the Help icon on the menu title for more information on these settings.
5. Tap outside the menu to close the menu.
Set the acquisition mode
Use this procedure to set the method the instrument uses to acquire and display the signal.
1. Double-tap the Acquisition badge on the Settings bar to open the Acquisition configuration menu.
2. Select the acquisition method from the Acquisition Mode list. Set any other parameters associated with the selected acquisition type.
4 Series B Mixed Signal Oscilloscopes MSO44B and MSO48B Quick Start Manual
Add a math, reference, or bus waveform
Operating basics
on page 51
49

Publicidad

loading

Este manual también es adecuado para:

Mso44bMso46bMso48b