Roadstar RCR-4635UMP Manual De Instrucciones página 5

English 2
PRECAUTION
INSTRUCTIONS - All the safety and operating instructions should be read before the
radio is operated. The manual should be retained for future reference.
HEED WARNINGS - All warnings on the appliance and in the operating instructions
should be adhered to.
WATER AND MOISTURE - The appliance should not be used near liquids or in
rooms with a high level of humidity.
VENTILATION - The appliance should be situated so that its location or position does
not interfere with its proper ventilation.
HEAT - The appliance should be situated away from heat sources such as radiators,
stoves or other appliances that produce heat.
POWER SOURCE - The radio should be connected to power supply only of the type
described in the operating instructions or as marked on the appliance.
POWER CORD PROTECTION -
Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon/against them.
OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall and
liquids are not spilled into the enclosure through openings.
DAMAGE REQUIRING SERVICE
The appliance should be serviced by qualified service personnel when:
The power supply cord or plug has been damaged;
Objects have fallen into or liquids has been spilled into the radio;
The appliance has been exposed to rain;
The appliance has been dropped or the enclosure damaged;
The appliance does not appear to operate normally.
SERVICING - The user should not attempt to service the appliance beyond that de-
scrive in the user operating instructions. All the servicing should be referred to quali-
fied service personnel
Note: If the display does not function properly or no reaction to operation of any con-
trol may due to the electrostatic discharge. Switch off and disconnect the AC cord and
remove all the batteries, then turn the power back on after a few seconds.
RADIO
Select the RADIO mode with the [SOURCE] (2) button, until FM frequency is shown
in the display.
Adjust radio frequency to your desired station as follows:
MANUAL SCAN: Use the [SKIP / TUN -/+] (5/6)buttons to fine tune your desired sta-
tion or press and hold the [SKIP / TUN -/+] (5/6) buttons to scan the next/previous
available station.
Preset station:
Automatic Preset:
Press and hold the [PLAY/PAUSE] (11) button on unit for about 2-3 seconds to start
the automatic preset process.
Display will show the memory sequence number and radio stations will be automati-
cally preset into the sequence number (Note: Each sequence number means 1 preset
station while during automatic preset process.)
Once all the stations were automatic preset, press the [PLAY/PAUSE] (4) button,
each time the key is pressed, it switches to the next PRESET (01,02,03 etc.)