Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
2. Assembly of the ironing board
Remove the ironing board and hanger from the packaging; insert the hanger into the top of
the ironing board (as shown in picture 1). Then, fit the brush hooks onto the telescopic tubes
behind the ironing board and insert the ironing board already mounted on the telescopic
tubes.
Fig. 3
3. Accessories assembly
To fix the clothes brush, press it lightly until it locks into the iron head. To remove the
accessory, follow the instructions in reverse order. If you have just finished ironing, be
careful, the iron will be hot. It is advisable to wear a protective glove before use.
Fig. 4
4. How to use the ironing board
To adjust the inclination of the ironing board, simply pull down the handle behind the ironing
board (as shown in the picture). It has 3 angles (45°, 90°, 180°).
Fig. 5
5. How to put the iron in the main body
Hold the iron head by the handle and place it on the hook/bracket by pushing the lower part
down until it locks into place.
Fig. 6
3. OPERATION
1.
Place the assembled steam station on a flat and stable surface. Adjust the height and
angle of the ironing board so that you can comfortably iron and hang your clothes on it.
2. Remove the water tank and unscrew the cap to fill it with water. Make sure that there is
enough water in the tank and that it is properly installed.
Fig. 7
3. Plug the power cord into the mains and switch on the appliance by pressing the power
button. When the indicator light comes on, the iron enters the preheating phase. After
about 45 seconds, preheating will be finished and the steam will come out automatically.
Adjust the different steam levels according to the type of garment material using the
buttons on the control panel. You can choose from five different fabrics: silk, rayon, wool,
cotton, and linen.
Fig. 8
Fig. 9
38
IRONHERO 2000 VERTICAL STATION
Publicidad
