Descargar Imprimir esta página

cecotec IRONHERO 2000 VERTICAL STATION Manual De Instrucciones página 39

Centro de planchado vertica

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
Using the iron
1.
Before ironing, put on the protective glove.
2. Start ironing at the widest part of the garment, holding the hem lightly in your hand to
stretch the creased part and better iron the creases with the hot steam (as shown in
pictures 1-4).
3. Press the head onto the garment without exerting too much pressure, and slowly iron the
desired area from top to bottom to allow the steam to penetrate the fibres of the fabric
better and thus remove wrinkles.
When moving the head from side to side, water droplets may fall
on the handle of the iron (danger of burns).
After ironing the main part, iron the other parts from top to bottom. To iron the collar,
you can fold it all the way back. Hold one end of the collar with your hand and move the
head from side to side with the other hand (as shown in picture 5). Be careful not to burn
yourself.
4. To iron the sleeves, stretch them completely and move the head from one end of the
sleeve to the other (as shown in picture 6).
Fig. 10
4. CLEANING AND MAINTENANCE
Important
It is recommended to use purified or distilled water to avoid contaminating garments.
The concentration of minerals varies according to the type of water. If you use hard water for
ironing, it may contain sediment, which can cause the steam flow to diminish, the iron to drip
or even stop working. Therefore, to avoid contaminating garments, it is recommended to use
purified or distilled water.
-
To prolong the life of the appliance, it is recommended to clean it regularly as follows:
-
Steps for cleaning and maintenance:
1.
Before each cleaning, switch off the appliance, unplug it from the mains and allow it to
cool down for at least half an hour.
2. Unscrew the cap and empty the remaining water in the tank.
Fig. 11
3. Remove and clean the water tank.
4. Use the drain outlet to clean the inside of the steam chamber (as shown in pictures 1-3).
Fig. 12
5. Use a cloth to clean and dry all parts and components.
WARNING: before each cleaning, switch off the appliance, unplug it from the mains and allow
it to cool down.
IIRONHERO 2000 VERTICAL STATION
ENGLISH
39

Publicidad

loading

Este manual también es adecuado para:

01866