Bosch GCM 8 S Professional Manual Original página 27

OBJ_BUCH-198-007.book Page 27 Friday, June 10, 2011 9:29 AM
34 Dust bag
35 Locking lever
36 Phillips screw (attachment of retracting blade guard)
37 Spindle lock
38 Allen screw (size 6 mm) for mounting of saw blade
39 Clamping flange
40 Saw blade
41 Interior clamping flange
42 Material clamp
43 Wing bolt
44 Threaded rod
45 Lighting unit
46 Laser unit
47 Depth stop lever
48 Screws for insert plate
49 Rubber cap
50 Adjustment screw for laser position
(parallelism)
51 Adjustment screw for laser position
(flush levelling)
52 Screws for laser protection cap
53 Laser protection cap
54 Adjustment screw for laser position
(lateral deviation)
55 Screw for mitre angle indicator
56 Screw for bevel angle indicator
57 Allen screw (size 3 mm) for standard bevel angle 0°
(vertical)
58 Allen screw (size 3 mm) for standard bevel angle 45°
(vertical)
59 Recessed handles
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Noise/Vibration Information
Measured sound values determined according to EN 61029.
Typically the A-weighted noise levels of the product are:
Sound pressure level 98 dB(A); Sound power level
111 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 61029:
2 2
a <2.5 m/s , K=1.5 m/s .
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 61029 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
Bosch Power Tools
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Technical Data
Sliding Mitre Saw
Article number
Rated power input
No-load speed
Laser type
Laser class
Weight according to
EPTA-Procedure 01/2003
Protection class
Permissible workpiece dimensions (maximal/minimal) see page 30.
Starting cycles generate brief voltage drops. Interference with other
equipment/machines may occur in case of unfavourable mains system
conditions. Malfunctions are not to be expected for system impedances
below 0.24 ohm.
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
Dimension of suitable saw blades
Saw blade diameter
Blade body thickness
Mounting hole diameter
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 61029,
EN 60825-1 according to the provisions of the directives
2004/108/EC, 2006/42/EC.
Technical file at:
Robert Bosch GmbH, Dept. PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 13.01.2010
English | 27
GCM 8 S
Professional
3 601 L16 0..
W 1400
-1
min 5000
nm 650
mW < 1
2
kg 15
/II
mm 210–216
mm 1.5–2.8
mm 30
1 609 929 X05 | (10.6.11)