Display Messages - MEGABRAS MPK 256 Manual De Uso

6. Display messages

MEGABRAS MPK-256
When turning the equipment On using the On/Off switch, this
introductory message appears for a while. During that time, the
equipment carries out some functional checking.
AUTO CHECK
Indicates that the equipment is performing internal checks.
PRESS START
Indicates that the equipment is able to start a test, for which the operator
must press the key .
LOW CURRENT
This warning indicates that the test current is insufficient to perform the
measurement. The control must be turned clockwise to increase
current.
I=MAX
Indicates that the current reached the maximum value.
OVERRANGE
Indicates that the measured resistance exceeds the maximum value of
the selected scale.
16