Interrupting operation
1. Release the lever of the trigger gun.
After approx. 5 minutes without opera-
tion, the device switches off automati-
cally.
Finishing operation
1. Remove the water reservoir.
2. Switch on the device.
3. Operate the lever of the trigger gun
until no more water escapes.
4. Release the lever of the trigger gun.
5. Empty the water reservoir complete-
ly.
6. Place the water reservoir onto the
device.
Transport
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
Manual transportation
1. Lift and carry the device by the car-
rying handle of the device.
Transportation in vehicles
WARNING
Risk of injury, risk of damage!
Be aware of the weight of the device
during transportation.
Stow or secure the device in accor-
dance with the applicable guidelines so
that it does not slide or jostle around
during transport.
1. Stow or secure the device in such a
way that it cannot slip or be thrown
around in the vehicle when acceler-
ating, braking, cornering or in the
event of an accident.
10
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during storage.
Keep the device safe
1. Place the device on a level surface.
2. Store the device within the permitted
ambient temperature (see chapter
Technical data).
Frost protection
ATTENTION
Risk of frost
Devices that are not completely emp-
tied can be destroyed by frost.
Fully empty the device and accesso-
ries.
Protect the device from frost.
1. Empty the device (see chapter Fin-
ishing operation).
Care and service
DANGER
Contact with live parts
Injury due to electric shock
Before carrying out any work on the
device, switch it off and disconnect it
from the charger.
Cleaning the valve opener / fine
Clean the valve opener and the fine fil-
ter regularly.
ATTENTION
Material damage due to improper
cleaning
Take care not to damage the valve
opener and the fine filter.
1. Remove the water reservoir, see
chapter Water supply.
English
Storage
filter