Descargar Imprimir esta página

Onkyo T-4500 Manual De Instrucciones página 2

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
e Congratulations on your purchase of the ONKYO T-4500 Tuner. @ Please read this manual
thoroughly before making connections and turning power on.
®@ Following the instructions
in this manual will enable you to obtain optimum performance and listening enjoyment from
your new 7-4500.
® Please retain this manual for future reference.
Features
Important safeguards
Precautions
System
connections
Front panel facilities..
Operations
Troubleshooting
guide
Specifications
Features
a
a
a
@ 40-Station
FM/AM
Random
Preset Tuning
CONTENTS
"SN
O§F
BPN
ND A
A=
The T-4500 lets you store up to 40 AM and FM stations in memory in any combination. Avid FM fans can devote most or all of the
memory settings to FM stations. If there are few FM stations in your area, simply increase the proportion of AM stations.
© Computer
Controlled APR
(Automatic
Precision Reception) system
Onkyo's exclusive APR system lets every FM broadcast sound its best. It constantly monitors the signal and selects the potimum settings
for three reception modes: auto stereo/mono, hi-blend on/off and IF bandwidth wide/narrow. Front panel indicators show all APR settings,
which can be overridden manually if desired.
® Classified
Memory
and Preset Classified Memory
Scan
Onkyo's classified memory feature allows you to assign the up to 40 stations in memory to any of six separate classes. For example,
you could assign stations according to type of music. If you then perform preset memory scan on class 3, say, only the stations assigned
to that class are scanned.
®@ Five-Gang
Variable Capacitor Used in Front End with MOS
FET for Enhanced Tuning Precision
@ FM Tuning
Steps Switchable
between
50/25 kHz Using Selector
® Automatic
Tuning
® Battery-Free
Backup System to protect Memory
Contents
@ Eight-Segment
Signal Strength Indicator
Important safeguards
RS
a
eae
CAUTION
@
For models having power cords with a polarized plug.
"CAUTION":
"TO PREVENT
ELECTRIC SHOCK
DO NOT USE THIS (POLAR-
IZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES
CAN
BE FULLY IN-
SERTED TO PREVENT
BLADE
EXPOSURE."
FOR
POWER
CORDS
WITHOUT
PLUGS
@
Replacement and mounting of an AC plug on the power cord
of this unit should be performed only by qualified service per-
sonnel.
@
IMPORTANT:
The wires in this mains lead are coloured in ac-
cordance with the following code:
Blue:
Neutral
Brown:
Live
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identifying the terminals
in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
1. Avoid places subject to direct sunlight or extremely high or low
temperatures.
2. Avoid damp or dusty places and places directly affected by
vibrations from the speakers. In particular, avoid placing the
unit on or above one of the speakers.
3. Avoid unstable locations and high places from which the unit
could fall.
4. Ventilation — The unit should be situated so that its location
or position does not interfere with proper ventilation. For ex-
ample, the unit should not be placed on a bed, sofa, rug of
similar surface that could block the ventilation openings or
placed in a built-in installation, such as a bookcase or cabinet,
that could impede the flow of air through the ventilation
openings.
5. Heat — The unit should be situated away from heat sources
such as radiators, heat registers, or other appliances (including
amplifiers) that produce heat.
6. Cleaning of the internal parts should be performed only by
qualified service personnel.
7. Spillage — Care should be taken so that objects do not fall and
liquids are not spilled into the enclosure through the openings.
8. Damage Requiring Service - The unit should be serviced by
qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen or liquid has been spilled into the ap-
pliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits
a marked change in performance; or
E. The appliance has been dropped or the enclosure damaged.
9. Servicing — The user should not attempt to service the appliance
beyond that described in the operating instructions. All other
servicing should be referred to qualified service personnel.
@
This apparatus complies with requirements of EEC directive
82/499/EEC.
-~-j[-

Publicidad

loading