Irradio STV-IR-3970-3 Manual De Instrucciones página 17

Step 5- Installing arm on a solid concrete or concrete clock wall
Caution: To prevent property damage or personal injury, never drill into the mortar between
the blocks. Plate directly onto the concrete surface.
1. Align the center of the wall plate at the arm at the height determined in the previous step
and make sure that it is level as you know. Mark the 6 screw hole locations.
2. Drill pilot holes to the depth of 60mm and 8mm diameter.
3. Insert concrete wall anchors into the pilot holes and use a hammer to make sure that the
anchors are flush with the concrete surface.
4. Align the wall plate with the anchors and then insert the screws through the holes in the wall
plate assembly. Tighten the screws until fasting the wall plate and anchors.
5. Do not over tighten for avoiding potential injuries or property damage.
6. Notice that the wall plate should stand level vertically and horizontally. The degree between
the arm and the wall must be 90 degrees.
Step 6 – Attach the TV to the arm
1. To make it easier to attach the TV to the wall plate, pick the Tv up from the corners in a way
you can see back of your TV.
• If your TV is huge, heavy or inaccessibility to say brackets and arm, you will need assi-
stance into this step.
2. At first, insert hooks that assembled to the brackets on top of the main body bent that as-
sembled to the arm.