Publicidad
Idiomas disponibles
Idiomas disponibles
3. Then, tight the screw that assembled on the brackets to the bottom bent part on the body.
4. Make sure that your TV stand resistantly on the body.
Step 7 – Making adjustment and managing cables
1. You can change the Tv position vertically by two screws that assembled on the hooks.
2. Note: When you sure that your TV is standing in place that you
want, tighten the screws and nuts to prevent unwanted movement.
3. Manage all cables by two cable keepers which are in your packet.
Put cable keepers to two profiles and then pass cables from inside
of cable keeper to prevent any slack, routing cables along the arms
and providing a clean look to your installation.
Publicidad
