Introduction..................................................................... 2
Safety..............................................................................4
Assembly........................................................................ 9
Operation...................................................................... 11
Maintenance................................................................. 14
Intended use
The product is used for cutting branches and twigs.
Note:
National regulations can set limit to the
operation of the product.
Product overview
1
2
3
4
6
7
8
26
27
29
1. Saw chain
2. Guide bar
3. Bar nut
4. Protective guard for saw chain
5. Locking knob
6. Chain lubrication adjustment screw
2
Contents
Introduction
5
9
25
28
Troubleshooting............................................................ 22
Transportation, storage and disposal........................... 23
Technical data.............................................................. 23
Accessories.................................................................. 24
Warranty....................................................................... 25
Only use the product with accessories that are approved
by the manufacturer. Refer to
10
11
23
24
7. Chain oil tank
8. Chain tensioning screw
9. Shaft
10. Front handle
11. Harness support hook
12. Stop switch
Accessories on page 24 .
12
13
14
15
21
22
20
19
18
17
712 - 009 - 29.08.2023
16