Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
Thank you for purchasing this RUNPOTEC RM35. These instructions for use
provide information on safe use. Read the instruc tions for use thoroughly
before commissioning. If you have any questions about commissioning,
assembly, safety and applications, or problems, please contact your
authorised retailer or RUNPOTEC. You will find our contact data on page 2.
See page 4 – 5 for application examples.
IMPORTANT INFORMATION
The RM35 is exclusively used for length measurements of cables and oth-
er yard goods.
Liability is excluded for every other use!
Before measuring, check the measuring wheel for wear and tear.
RM35 DESCRIPTION (Page 3)
1
Button for opening
2
Cable inlet or cable outlet opening
3
1.5" LCD display
4
USB-C charger socket
5
Index mark – Start/end point for measurement
6
Tempered measuring wheel
7
Guide jaws for precise measurement (2 x 6/24 mm + 2 x 12/18 mm)
Bolt for mounting on mounting plate system case or for fastening a
8
belt with a clip system and anchor pad
9
RUNPOTEC system case with RM35 case insert
10
Mounting plate RM 35 for fi xing to the fl oor
11
Mounting plate for fi xing on the RUNPOTEC system case
12
Longitudinally adjustable belt with clip system
13
Anchor pad
14
Multi-jaws RM35 - Round
15
Power adapter with USB-C charger cable
DISPLAY KEYS DESCRIPTION (Page 3)
A
Menu settings
B
Set a plus value
C
Set a minus value
D
Reset measured values
E
∑ Total 1 – (added measured values) = display TOTAL 1
F
∑ Total 2 – (added measured values) = display TOTAL 2
G
Current measured value / counter value (positive/negative)
H
Actual – counts up to the preset countdown value
I
Countdown (adjustable)
J
Pulling direction display
K
Meter / Feet – displays the set unit
L
Display backlighting on/off
M
Audible signal on/off
N
Battery state of charge
RUNPOTEC GmbH – Irlachstrasse 31 – A-5303 Thalgau
Tel.: +43-6235-20 335 – Fax: DW 35 – office@runpotec.com
ENGLISH
11
Publicidad
