Runpotec RM 35 Instrucciones De Uso página 15

USE OF ACCESSORIES SYSTEM CASE MOUNTING PLATE
1 2
The RM35 can be attached to the RUNPOTEC system case for stationary
operation by means of a mounting plate system case.
1 Open the folded system case mounting plate by pressing the red button.
2 Place on case, engage to case on one side.
3 Fix the system case mounting plate on the other side with the red case
locking mechanism. (Fold the red locking mechanism up).
4 Insert/engage the device into/in the holder provided for this purpose.
To remove the device: press the red button, remove the device.
See page 4 – 5 for further application examples
APPLICATION - ACCESSORIES MOUNTING PLATE RM35
Mounting plate RM35 - lockable
RUNPOTEC GmbH – Irlachstrasse 31 – A-5303 Thalgau
Tel.: +43-6235-20 335 – Fax: DW 35 – office@runpotec.com
3
For stationary operation, the RM35
can be mounted on straight surfaces
by means of the RM35 mounting
plate, which has several drill holes.
Insert / hook the RM35 into the
holder provided for this purpose.
Press the red button to fix or remove
the device. Make sure that the allen
screw is in the lower opening and
thus unlocked.
Mounting plate RM35 - unlocked.
Allen screw in lower opening. The
RM35 can be unlocked and remo-
ved by pressing the red button.
Mounting plate RM35 - locked. Allen
screw in upper opening.
The RM35 can no longer be removed
by pressing the red button. Is locked.
ENGLISH
4
15