Publicidad
Idiomas disponibles
Idiomas disponibles
7. Unpacking and setting up the appliance
Preparing the appliance
The packaging materials must be
undamaged.
Inspect the appliance for transport
damage.
On no account should a damaged
appliance be put into operation.
In case of damage, contact After Sales
Service www.ggv-service.de.
ATTENTION
RISK OF DAMAGE!
Do not use sharp knives or other pointed
objects when opening to avoid damaging the
appliance.
Setting up the appliance
•
Place the heater at least 50 cm away
from furniture or other objects.
Do not use this appliance near a
•
bathtub, shower, washbasin or
swimming pool.
WARNING
FIRE HAZARD!
To reduce the risk of fire, keep textiles,
•
curtains or other flammable materials
at least 1 m away from the air outlet.
•
Never cover the appliance
during or shortly after
operation.
8. Cleaning and care
Regular cleaning and maintenance of the
appliance not only protects the environment
and saves energy, but also increases its service
life. The following description provides valuable
tips.
Always allow the appliance to cool
•
down completely before cleaning.
Always remove the plug from the
•
socket before cleaning.
Clean the air inlet/outlet grille
•
frequently with a dry cloth.
The appliance
Set up the appliance in an easily
•
accessible location.
Set up the appliance on a level, dry and
•
sufficiently stable surface.
Do not place the appliance at the edge
•
of a surface.
Do not place any objects on the
•
appliance.
•
Never expose the appliance to high
temperatures (heaters, etc.) or adverse
weather conditions (rain, etc.).
Switching on the appliance
1. Turn the power level rotary knob (5)
from A (Off) to the desired ventilation.
A= Off
B= Cold setting without heat
C= I 1000 Watt power
C= II 2000 Watt power
2. Use the temperature control rotary knob
(3) (from left to right) to set the desired
temperature.
Regulating the temperature controller
When the room has reached the desired
temperature, turn the temperature control (2)
anticlockwise until the appliance is switched off
but not beyond.
In this way, the set temperature regulates itself
automatically.
Summer mode (ventilation only)
Turn the power level rotary knob (5) to position
B and ventilation starts.
WARNING
ELECTRIC SHOCK HAZARD!
Disconnect the appliance from the
•
mains power supply.
Never immerse the appliance or the
•
remote control in water for cleaning.
EN
Page | 15
Publicidad
