Installation And Operation Of The Bwt Ro App; Installation Of The App; Operating The App; Troubleshooting - BWT THERO 90PRO Instrucciones De Montaje Y Manejo

3.4 Installation and operation of the BWT
RO app
Observe: The BWT THERO 90PRO app
is only available for the BWT THERO
90PRO.
BWT THERO 90PRO (basic version)
does not contain any app control.

3.4.1 Installation of the app

If the BWT RO app is not yet installed on your
mobile phone, please scan the QR code below.
This will take you to the website where you
can download the app. The app can also be
downloaded under the following internet ad-
dress: www.bwt-wam.com

4 Troubleshooting

4.1 Overview of the status and alert LED

Status:
working
ready
connected to App
Service
Fault
LED Farbe:
green light
green flashing light
blue light
red light
red light
(constant or flashing)
NOTE: Ensure that Bluetooth is activa-
ted on your end device.
When installing the app for the first
time on an iOS end device, download
the app and proceed as follows to
activate it: Settings / General / Device
Management / BWT Aktiengesellschaft
/ Trust BWT Aktiengesellschaft
The app is a purely offline application.
No data is transmitted to BWT.

3.4.2 Operating the app

You will find the operating instructions for the
BWT RO app attached (Appendix).
Gerätezustand:
RO device in production
Device is on standby
Mobile device connected to RO via Bluetooth
Service required
(Chapter 5.5.4)
Error message displayed in app
EN
(Chapter 6.2)
22