Publicidad
56 – Comunicaciones
(continuación)
4 = Ethernet
4 = Ethernet
01= Module
Config
02 = Alarm
Reporting
03 = Remote
Access
04 = Autotest
05 = Engineer Test
06 = Fail to Comm
07 = Line Fail
09 = Encrypt
1 = IP Address
2 = Site Name
3 = Gateway IP
4 = Network Mask
1 = Format
2 = Primary IP
3 = Secondary IP
4 = Account No.
5 = Receiver
6 = Alarm Mon.
7 = Heartbeat
8 = Protocol
1 = Access Period
2 = Mode
1 = Interval
1 = Network
2 = Signal Path
1 = Alarm Report
2 = Remote Access
4 = Alarm Mon.
Figura 37. Estructura de programación de Ethernet
Manual de instalación y programación de Galaxy 2
1 = SIA (0-3)
1 = Trigger
2 = Microtech
1 = Trigger
1 = IP Address
2 = Port No.
1 = IP Address
2 = Port No.
1 = Alternate
2 = Dual
1 = Triggers
2 = Account
3 = IP
4 = Port No.
1 = Interval
30 (0-60) mins
0 = UDP
1 = TCP
1 = Full
2 = When Unset
3 = No Unsetting
1 = Direct access
1 = Call Back IP1
2 = Mgr Authorize
2 = Call Back IP2
3 = Call Back IP3
4 = Call Back IP4
5 = Call Back IP5
0 = Off
1 = Available
1 = Primary
2 = Secondary
3 = Alarm Mon.
4 = Any
5 = All
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
Series
1 = IP Address
2 = Port No.
1 = IP Address
2 = Port No.
1 = IP Address
2 = Port No.
1 = IP Address
2 = Port No.
1 = IP Address
2 = Port No.
Publicidad
