Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Using Your RoboVac
OFF
ON
- Always keep the Charging Base plugged in, otherwise
RoboVac will not automatically return.
- When the Charging Base is connected to AC power, the
LED indicator on the Charging Base is SOLID WHITE.
Download the EufyHome app and follow
the in-app instructions to complete the
Wi-Fi connection. You then will be able to
control RoboVac via this app. Refer to the
Owner's Manual for details.
Remove the sticker next
to the power switch, and
the foam blocks beside the
bumper before use.
If you cannot remove the
objects surrounding the
Charging Base, check
whether RoboVac can
return without assistance; if
not, contact eufy customer
service for help.
Fully charge RoboVac before use. The
LED indicator on RoboVac pulses
orange while charging, and is solid
blue when fully charged.
EufyHome
EufyHome
Important Tips
When using for the first time, follow RoboVac to observe and resolve any problems that may occur.
A
B
D
E
A
Remove power cords and small objects from the floor that may entangle RoboVac. Use the
supplied cable ties to organize your wires and power cords.
B
Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very
dark-colored high-pile rugs or rugs thicker than 1.02 in/26 mm as they may cause RoboVac to
malfunction.
C
It is strongly recommended to place boundary strips (sold separately) in front of fireplaces
and certain areas (i.e. air vents) that may cause damage to RoboVac if entered.
D
Keep RoboVac away from wet areas during cleaning.
E
RoboVac may climb on top of objects less than 0.67 in/17 mm in height. Remove these
objects if possible.
F
Anti-drop sensors will prevent RoboVac from tumbling downstairs and steep drops in most
cases. Sensors are less effective if dirty or used on carpeted/reflective/very dark-colored
floors. It is recommended to place physical barriers to block off areas where RoboVac may fall.
EN
C
F
Publicidad
