Beurer UB 60 Instrucciones Para El Uso página 15

4.4 Selecting the temperature setting
To increase the temperature, press the
After switching on the temperature setting is illuminated.
Setting 0: OFF
Setting 1: minimum heat
Setting 2-3: Individual heat
Setting 4: maximum heat
NOTE:
• The quickest way to heat up the heated underblanket is to select the highest temperature setting
of the control, first.
• We strongly recommend switching on the heated underblanket approx. 30 minutes before going to
bed and covering it with the quilt to prevent the warmth from escaping.
WARNING
If the heated underblanket is being used over several hours, we recommend that you set the lowest
temperature setting on the control to avoid the body overheating and thereby any potential burns to
the skin or heat stroke.
4.5 Automatic switch-back
NOTE:
This heated underblanket features an automatic switch-back for safety purposes. Temperature settings
4 and 3 are automatically switched to temperature setting 2 after 3 hours.
4.6 Automatic switch-off
This heated underblanket is equipped with an automatic switch-off. This turns off the heat supply 12 hours
after the heated underblanket is first switched on. This is indicated by a flashing temperature setting. In order
to reactivate the heated underblanket, the sliding switch (4) must initially be set to off ("0" position). After about
5 seconds it is possible to switch it on again. If the heated underblanket will not be used after timed switch-off,
it should be switched off (sliding switch to position "0") and the mains plug removed from the mains socket.
4.7 Switching off
Set the ON/OFF slider (4) to the OFF (0) position to switch off the heated underblanket. After switching off
the temperature setting is not illuminated any more.
NOTE:
If the heated underblanket won't be used for several days, switch it off (Slider to setting „0"/OFF) and
remove the supply plug from the mains outlet.
5. Cleaning and maintenance
WARNING
Always remove the supply plug from the mains outlet and remove the control from the heated under-
blanket by disconnecting it at the connector. Otherwise there is a risk of an electric shock.
CAUTION
The control must never come into contact with water or other liquids, as this may cause damage.
• To clean the control, use a dry, lint-free cloth. Do not use cleaning agents containing solvent or scouring
agents.
• To remove stains from the heated underblanket use a damp cloth and, if necessary, a mild cleaning agent.
button (6). To decrease the temperature, press the
15
button (7).