Ebinger Donkey XL Manual De Instrucciones página 19

DE EN
8. Charging the battery
The following instructions describe how to charge the battery. 1.
1. Turn the key to the vertical position (Fig. 6). The LED on the thumb lever goes out (fig. 7). 2.
2. First insert the charging plug into the charging socket (Fig. 8) and then into the power supply (Fig. 9).
Charger LED indicator:
RED Switched on (no charging)
YELLOW Charging
GREEN Battery fully charged (trickle charge)
The charging time for a completely discharged battery is approx. 10-12 hours.
ATTENTION: The selector switch from the charger must match the mains voltage of the respective country
(110V or 230V, fig. 9),
The default setting is 230V.
fig. 6
fig. 9
Charge the battery every 6-8 weeks even when the electric wheelbarrow is not in use to avoid deep
discharge.
FR ES
fig. 7
ON-OFF switch
Mains voltage
IT
fig. 8
19