Publicidad
Idiomas disponibles
Idiomas disponibles
;
Before using this equipment, record the product identification information from the ID label in the 'Inspection and Maintenance Log' at the
back of this manual.
System Specifications:
Anchorage:
Anchorage structure requirements vary with the system application and whether it is a certified anchorage or
non-certified anchorage. The anchorage structure must sustain static loads applied in the directions permitted by
the Fall Protection system.
When more than one system is attached to an anchorage, the strengths stated above must be multiplied by the
number of systems attached to the anchorage. See ANSI Z359.2 for more information.
Service Temperature: -
40°F to 130°F (-40°C to 54.4°C)
Standards:
E
If none are specified, then all standards and regulations listed on the cover apply.
Capacity:
See the performance tables for product capacity. The listed capacities apply to use of the product in all compatible
applications, unless otherwise stated. This product is for use by one user with a combined weight (including
clothing, tools, etc.) within the applicable capacity range.
Component Specifications:
Figure 2
Component
Reference
A
Lifeline
B
Housing
C
Bottom Connector
D
Top Connector
E
Swivel Eye
F
Energy Absorber
G
Rotation Handle
H
Bracket
I
Modular Connector
---
Drum
;
Internal Components: Internal SRD components are made from a combination of Stainless Steel, Steel, and Aluminum.
Connector Specifications:
Figure 1
Model Number
Reference
C1
2000112
C2
2000175
;
Tensile Strength: The tensile strength of each of the connectors listed above is 22.2 kN (5,000 lbf).
Modular Connectors:
Modular Energy
SRD Model
Absorber
3590298
1340151
Table 1 – Product Specifications
System Application
Certified Anchorage
Fall Arrest
2 times maximum
arresting force
Restraint
2 times foreseeable force
Rescue
5 times applied load
;
Anchorage must be approved by a Qualified Person.
ach product model is certified to, or conforms with, the applicable standards and regulations listed within Figure 1.
Description
Carabiner
Swivel self-locking snap hook
Connecting Component
D-ring
Buckle
9506214
9501441
Non-Certified Anchorage
5,000 lbf (22.2 kN)
1,000 lbf (4.4 kN) per ANSI
5,000 lbf (22.2 kN) per OSHA
3,000 lbf (13.3 kN)
Materials
(see Lifeline Specifications)
Thermoplastic, Aluminum (Retrieval models only)
(see Connector Specifications)
(see Connector Specifications)
Steel
Polyester fabric cover with polyester lifeline
Steel
Stainless steel
Zinc-plated steel
Aluminum
Material
Steel
Zinc-plated steel
4
Defined by
OSHA, ANSI
OSHA, ANSI
ANSI
Gate Opening
Gate Strength
11/16 in. (17 mm)
3,600 lbf (16 kN)
3/4 in. (19 mm)
3,600 lbf (16 kN)
C1
C2
Publicidad
