Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Replace
Doors
and
Hinges
1.
Assemble
the parts for the top hinges
as shown
in Top Hinge
graphic.
Do not tighten
the screws completely.
2.
Replace
the parts
for the bottom
hinge
as shown
in Bottom
Hinge
graphic.
Tighten
screws.
Replace
the refrigerator
door.
3.
NOTE:
Provide
additional
support
for the refrigerator
door
while
the hinges
are being
moved.
Do not depend
on the
door gasket
magnets
to hold the door
in place while
you are
working.
Align
the door
so that the bottom
of the refrigerator
doors
align
evenly
with
the top of the freezer
drawer.
Tighten
all
screws.
4. Replace the top hinge covers.
Remove and Replace
Freezer Drawer Front
IMPORTANT: Two people may be required to remove and
replace the freezer drawer. Graphics are included later in this
section.
To remove
drawer
front:
1.
2.
Open
the freezer
drawer
to full extension.
Loosen the four screws
attaching
the drawer
glides
to the
drawer
front.
See Drawer
Front Removal
graphic.
NOTE:
Loosen screws
three to four turns.
Keep the screws in
the drawer
front.
3. Lift drawer front upward and off the screws. See Drawer
Front Removal graphic.
4. The refrigerator
leveling/roller
assembly protrudes from
each side of the cabinet base. Remove the three screws
attaching
each assembly, and remove the assemblies. See
Refrigerator
Leveling/Roller
Assembly graphic.
To replace drawer
front:
1. Align the leveling/roller
assembly with the holes on each
side of the refrigerator
cabinet. Using the screws removed,
reinstall the assemblies to the cabinet base. Tighten the
screws completely.
2. Slide the drawer glides out of the freezer compartment.
Insert the screws in the top of the drawer front into the slots
in the drawer
brackets. See Drawer Front Replacement
graphic.
3. Pull the drawer brackets toward you to position the two
screws in the bottom of the drawer
front into the brackets
and completely
tighten the four screws. See Drawer Front
Replacement
graphic.
Replace
the base grille.
•
Pull open
the freezer
drawer.
•
Align
the three
clips on the back of the base grille
with
the three
tabs at the base of the refrigerator.
•
Push the base grille
in toward
the refrigerator
until it is
firmly
in place.
U
A
/
B
\
A. Tab
B. Clip
Final Steps
Electrical
Shock
Hazard
Plug into a grounded
3 prong
outlet.
Do not remove
ground
prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these instructions can result in death,
fire, or electrical
shock.
1. Plug into a grounded 3 prong outlet.
2. Return all removable
parts to doors and drawer and food to
refrigerator
and freezer.
Publicidad
