GLIDEAWAY COMFORTBASE PRELUDE CB075 Manual De Usuario página 12

ASSEMBLY - BASE
To Motor
Locking Clip
7
Insert one end of the DC cord into the
power supply. Insert the other end with
locking clip into the cable coming from the
Head Motor. Lock the connection using
the locking clip.
8
Insert the AC cord into the power supply.
IMPORTANT: DO NOT PLUG THE
BASE INTO THE AC OUTLET YET.
9
Remove the Mattress Retainer Bar
from the bottom of the base. Finish
removing the plastic packaging
from the base to orient into final
position. Carefully rotate the base on
its side, then lift and place on legs.
IMPORTANT: DO NOT LEAN THE BED
AGAINST THE INSTALLED LEGS TO
TURN OVER.
10
Insert the Mattress Retainer Bar
upright as shown.
11
Insert the Retainer Clip securely.
11