Publicidad
Idiomas disponibles
Idiomas disponibles
Typical steady state input-output characteristics
Typical steady state input-output characteristics
130
120
110
100
90
80
70
40
50
Figure 3: Input-Output characteristics for Baha 5 SuperPower
Measured with reference test setting of the gain control (RTS) according to IEC60118-9:2019
1
2nd Ed. The RTS is set to full-on-gain minus 10 dB and expansion active.
Measured at 2 kHz with maximum compression ratio and with reference test setting of the gain
2
control (RTS) according to IEC60118-9:2019 2nd Ed. The RTS is set to full-on-gain minus 10 dB
and expansion active.
Service and repair
If your sound processor needs service repair, please
contact your clinic. Contact details, including an address
can be found on the back cover of this manual.
Clinical and non-clinical performance
Performance testing was conducted to compare the Baha
5 SuperPower Sound Processor with the predicate implant
/ abutment systems. Substantial equivalence to the
predicate device was accomplished through environmental
testing, reliability and durability testing, electrical
interface testing, and functional and performance testing.
AGC min
1
AGC max
2
60
70
Input SPL [dB rel. 20µPa]
80
90
The results demonstrated the Baha 5 SuperPower Sound
Processor is functionally equivalent to the predicate
devices.
English
19
Publicidad
