Publicidad
Idiomas disponibles
Idiomas disponibles
* Do not place any object on top of charger or place the charger
on a soft surface that might
block the ventilation
slots and result in excessive
internal heat. Place the charger
in a
position
away from any heat source.
The charger is ventilated
through slots in the top and the
bottom of the housing.
* Do not mount charger
on wail or perrnanentJy
affix charger
to any surface.
The charger is
intended
to use on a flat, stable surface (i.e., table top, bench top).
* Do not operate
charger
with
damaged
cord or plug -- have them replaced
immediately.
* Do not operate
charger
if it has received
a sharp blow,
been dropped,
or otherwise
damaged
in any way.
Take it to an authodzed
service center.
* Do not disassemble
charger;
take it to an authorized
service center when service or repair is
required.
Incorrect
reassembly
may result in a risk of electric shock, electrocution
or fire.
* Disconnect
the charger from the outlet before
attempting
any cleaning.
This will reduce
the risk
of electric shock. Removing
the battery pack will not reduce this risk.
* NEVER attempt
to connect
2 chargers
together.
* The charger
is designed
to operate
on standard
household
electrical
power (120 Volts).
Do
not attempt
to use it on any other voltage.
iMPORTANT
SAFETY
iNSTRUCTiONS
FOR BATTERY
PACKS
!_WARNING:
For safe operation,
read this manual and manuals
originally
supplied
with tool
before using the charger.
The battery
pack is not fully charged
out of the carton.
Before using the battery pack and charger,
read the safety instructions below. Then follow charging
procedures
outlined.
READ ALL INSTRUCTIONS
* Do not incinerate
the battery
pack even if it is severely
damaged
or is completely
worn
out.
The battery pack can explode
in a fire. Toxic fumes and materials
are created
when battery packs
are burned.
* Do not charge
or use battery
in explosive
atmospheres,
such as in the presence of flammable
liquids,
gases or dust. Inserting or removing
the battery from the charger may ignite the dust or fumes.
* if battery
contents
come
into contact
with
the skin, immediately
wash area with
mild soap
and water.
If battery liquid gets into the eye, rinse water over the open eye for 15 minutes
or
until irritation ceases.
If medical attention
is needed,
the battery electrolyte
for Li-ion batteries
is
composed
of a mixture of liquid organic carbonates
and fithium salts.
* Contents
of opened
battery
cells may cause respiratory
irritation.
Provide fresh air. If symptoms
persist, seek medical attention.
_WARNING:
BURN HAZARD.
BATTERY
LIQUID
MAY BE FLAMMABLE
IF EXPOSED
TO
SPARK
OR FLAME.
* Charge the battery packs only in Craftsman
C_ chargers.
* DO NOT splash
or immerse
in water
or other liquids.
This may cause premature
cell failure.
* Do not store or use the tool and battery
pack in locations
where
the temperature
may reach
or exceed
105°F (40°C) (such as outside sheds
or metal buildings
in summer).
!_WARNING:
Never attempt
to open the battery pack for any reason. If battery pack case is
cracked
or damaged,
do not insert into charger. Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has received
a sharp blow, been dropped,
run over or damaged
in
any way (i.e., pierced with a nail, hit with a hammer,
stepped on). Damaged
battery packs should be
returned
to service center for recycling.
_WARNING:
Fire hazard.
Do not store or carry
battery
so that rnetaJ objects
can contact
exposed
battery
terrninaJs.
For example,
do not place battery in aprons,
pockets,
tool boxes,
product
kit boxes,
drawers,
etc., with loose nails, screws, keys, etc. Transporting
batteries
can
possibly
cause fires
if the battery
terrninals
inadvertently
come
in contact
with
conductive
rnaterials
such as keys,
coins,
hand tools
and the like.
The US Department
of Transportation
Hazardous
Material
Regulations
(HMR) actually prohibit
transporting
batteries
in commerce
or on
airplanes
(i.e., packed
in suitcases
and carry-on
luggage)
UNLESS
they are properly
protected
from
short circuits. So when transporting
individual
batteries,
make sure that the battery
terminals
are
Publicidad
