Descargar Imprimir esta página

Technics SL-PG450 Instrucciones De Funcionamiento página 38

Ocultar thumbs Ver también para SL-PG450:

Publicidad

Disc Link
Enlace de discos
: '
.
The function allows you to perform edit re¬
cording of multiple discs, either in their origi¬
nal order or for tracks you select, in accor¬
dance with the specified tape length.
Editing in the disc's original
track order
Example:
Recording a disc with nine tracks on a C-60
tape, and recording another disc in the extra
space on side B.
1
Prepare the cassette deck.
Perform step 1 on page 30.
2
Press TAPE LENGTH and spec¬
ify the length of the tape.
Perform step 2 on page 30.
3
Press DISC LINK.
4
Adjust the recording level.
Perform steps 3 and 4 on page 30.
5
Press ► PLAY.
Recording on the cassette deck will start at
the same time.
If the cassette deck is set to the auto-reverse
mode, recording on tape side B will be auto¬
matically made.
When recording on tape side B has finished,
the CD player will automatically stop and the
cassette
deck will switch
to recording
standby mode.
•If the cassette deck has no SYNCHRO
EDIT terminal, see page 32.
6
Press
A
OPEN/CLOSE to open
the tray, and change the disc.
The tracks which can be recorded in
the time remaining are displayed,
If u0" appears on the display, the first track
on that disc is longer than the remaining
space of the tape. In this case press
■ STOP to cancel the edit mode, or change
the track which better matches the remain¬
ing time.
7
Adjust the recording level.
Perform steps 3 and 4 on page 30.
8
Press ► PLAY.
To record three or more discs, perform
steps 6 to 8.
To cancel CD editing mode:
Press ■ STOP.
Notes
•When a new disc is inserted close to the
end of side A of the tape and the time
remaining on side A is shorter than the
next track, advance the tape to the begin¬
ning of side B and begin recording again.
•The
cassette
deck
which
has
no
SYNCHRO EDIT terminal continues to ad¬
vance the tape even after disc playback
has ended. Don't forget to stop the tape
and rewind It to the point where recording
ended.
•If the cassette deck is not equipped with an
auto reverse mode, change the tape over
to side B when the recording on side A is
finished.
Esta funcidn ie permite realizar la grabacibn
con edicidn de multiples discos, blen en su
orden original o seleccionando las melo-
dias que usted desee, de acuerdo con la
duraclbn especificada de la cinta.
Edicion en el orden original
de las melodias del disco
Ejemplo;
Grabacibn de un disco con nueve melodias
en una cinta C-60, y grabacibn de otro disco
en el espacio extra del iado B.
1
Prepare la platlna.
Reallce el paso 1 de la pagina 30.
2
Pulse TAPE LENGTH y espe-
cfflque la duracldn de la cinta.
Realice el paso 2 de la pagina 30.
3
Pulse DISC LINK.
4
A juste el nlvel de grabacldn.
Realice los pasos 3 y 4 de la pagina 30.
5
Pulse ► PLAY.
La grabacibn en la platina empezara al mis-
mo tiempo.
Si la platina se ajusta al modo de inversibn
automdtica, la grabacibn en el Iado B de la
cinta se hard automdticamente.
Cuando termine la grabacibn en el Iado B de
la cinta, el reproductor de discos compactos
se parara automaticamente y la platina se
pondra en el modo de espera de grabacibn.
•Si la platina no tlene terminal SYNCHRO
EDIT, consults la pagina 32.
(Continued on next page)

Publicidad

loading

Este manual también es adecuado para:

Sl-pg350