Publicidad
Idiomas disponibles
Idiomas disponibles
EN
EMPTYING PROCESS
Disconnect the plug (13) from the socket.
Empty the reservoir (11) by turning the iron upside down and shaking it lightly.
Let the iron cool down completely.
Always set the iron upright.
ZERO-CALC ANTI-SCALE SySTEM
A special resin filter inside the water reservoir decreases the water hardness and limits the
formation of limescale in the plate. The resin filter is permanent and cannot be replaced.
SELF CLEAN/CALC-CLEAN SySTEM
The function allows the internal part of the plate to be cleaned from limescale residue or
other impurities.
It is recommended to implement this function every 5 - 10 times it is used.
Fill the water reservoir (11) up to the maximum (MAX) level (9).
Set the steam selector (5) to 0.
Adjust the temperature knob (2) to maximum and wait for the plate temperature control LED
(1) to go off.
Disconnect the plug (13) from the socket and immediately place the iron in a horizontal
position over a wash basin.
Press the Calc-Clean (8) button until hot water, steam and any impurities or limescale come
out of the plate.
Once the iron plate has cooled down (10), clean it with a damp cloth.
CLEANING
ATTENTION!
Make sure the plug of the appliance (13) is disconnected from the
socket and the plate has cooled down completely before cleaning the
iron.
Any starch deposits or residue on the surface of the plate can be removed with a damp cloth
and non-abrasive liquid detergent.
Avoid scratching the plate with steel wool or metal objects.
The plastic parts can be cleaned with a damp cloth and then wiped with a dry cloth.
16
AFTER IRONING
MAINTENANCE
Publicidad
