Whirlpool W7 OM5 4S P Guía De Consulta Diaria página 6

1. CONVENTIONAL
Turn the adjustment knob to select the function, confirm
by pressing , and then press
. AUTOMATIC CLEANING – PYRO
Do not touch the oven during the Pyro cycle.
Keep children and animals away from the oven
during and after (until the room has finished
airing) running the Pyro cycle.
Remove all accessories - including shelf guides - from
the oven before activating the function. If the oven is
installed below a hob, make sure that all the burners
or electric hotplates are switched off while running
the selfcleaning cycle. For optimum cleaning results,
remove the worst soiling with a damp sponge before
using the Pyro function. We recommend only running
the Pyro function if the appliance contains heavy soiling
or gives off bad odours during cooking.
Turn the selection knob on
display.
1.Pyro
Turn the adjustment knob to select the desired cycle,
then press to confirm. Once a cycle has been
selected, if desired, turn the adjustment knob to set end
time (start delay), then press
The display will prompt you to do all actions needed
to obtain the best cleaning results: Follow the
indications and then press
Once you have done all steps, when required press
to activate the cleaning cycle.
The oven will begin the self-cleaning cycle, while the
door locks automatically: a warning message appears
on the display, along with a countdown indicating the
status of the cycle in progress.
Once the cycle has been completed, the door remains
locked until the temperature inside the oven has
returned to a safe level.
6
to activate.
to show "CLEANING" on the
to confirm.
when done.
. MINUTEMINDER
When the oven is switched off, the display can be used
as a timer. To activate this function, make sure that the
oven is switched off and turn the adjustment knob: The
icon will flash on the display.
Turn the adjustment knob to set the length of time you
require and then press
MINUTE-MINDER
An audible signal will sound and the display will
indicate once the minuteminder has finished counting
down the selected time.
Please note: The minuteminder does not activate any of the
cooking cycles. Use the adjustment knob to change the time
set on the timer.
Once the minuteminder has been activated, you can
also select and activate a function. Turn the selection
knob to switch on the oven and then select the function
your require. Once the function has started, the timer
will continue to count down independently without
interfering with the function itself.
Please note: During this phase, it isn't possible to see the
minuteminder (only the
continue counting down in background. To retrieve the
minuteminder screen turn the selection knob to "0" to stop
the function that is currently active.
. KEYLOCK
To lock the keypad, press and hold
seconds. Do this again to unlock the keypad.
KEYLOCK
Please note: This function can also be activated during
cooking. For safety reasons, the oven can be switched off at
any time by turning the selection knob to "0".
to activate the timer.
icon will be displayed), that will
for at least five