Armada Technologies Pro400 Manual De Instrucciones página 15

Section 5 – Maintenance
5.1 Battery Replacement
Disconnect the instrument from any cable or network link
•
Turn the instrument off
•
Loosen the two black screws and remove the battery
compartment cover.
•
Replace the batteries with (4) 1.5-volt Alkaline batteries,
observing the polarities.
•
Refit the battery compartment cover and tighten the two
screws.
5.2 Cleaning
Disconnect the instrument from any source of electricity.
•
Turn the instrument off
•
Using a soft cloth lightly dampened with soapy water, wipe
over the instrument. Rinse the cloth in clean water
squeezing out any excess water. Wipe over the instrument
removing any soap residue. Then dry the instrument with a
dry cloth. Do not splash water directly on the instrument.
•
Do not use alcohol, solvents, or hydrocarbons to clean
instruments.
5.3 Storage
If the instrument is not to be used for a period of more
than 60 days, it is recommended that the batteries are
removed and stored separately (see 5.1).
15