Husqvarna Aspire T28-P4A Manual De Usuario página 8

(Fig. 9)
Beware of thrown objects.
(Fig. 10)
Do not use metal blades.
(Fig. 11) The product agrees with the applicable
EU directives.
(Fig. 12)
The product conforms to the applicable
UK regulations.
(Fig. 13)
Direct current.
The distance between the ma-
chine and bystanders shall be at
(Fig. 17)
least 15 m (50 ft).
yyyywwxxxxx The rating plate or the laser
printing shows the serial number.
yyyy is the production year and
ww is the production week.
Symbols on the battery and/or on the
battery charger
(Fig. 18)
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
Used if there is a risk of
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
8
Recycle this product
at a recycling sta-
tion for electrical and
electronic equipment.
(Applies to Europe
only)
Safety
Used if there is a risk of
(Fig. 19)
(Fig. 14) Fail-safe transformer.
(Fig. 15) Use and keep the battery charger indoors
only.
(Fig. 16) Double insulation.
Product damage
We are not responsible for damages to our product if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Manufacturer
Husqvarna AB
SE-561 82, Huskvarna, Sweden
General power tool safety warnings
WARNING:
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Note:
Save all warnings and instructions for future
reference. The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
Check before starting
• Always remove the battery to prevent the product
being started by accident. Always remove the battery
before any maintenance on the product.
• Before using the product and after any impact,
check for signs of wear or damage and repair as
necessary.
• Inspect the working area. Remove all loose objects,
such as stones, broken glass, nails, steel wire, string
Use the battery on-
ly in products from
POWER FOR ALL
System partners.
Read all safety warnings
1885 - 005 - 18.12.2023