PIEPS PRO IPS Guia De Inicio Rapido página 13

NO SIGNAL OK
IN RANGE Group check outcome
No signal detected OK – transceiver
within 1m range. sending correctly,
distance to sender
is indicated.
PRO MODE
Pro mode allows the user to perform a transmit check as well as a receive check
without exiting the group check mode. It is disabled by default and can be enable via
the PIEPS app. Check the manual for more details.
SEARCH
SIGNAL SEARCH
If you do not receive a signal or see signs of a buried victim on the avalanche debris,
move quickly through the search area, while minding the stated search strip width
of your beacon.
24
NOT OK TOO MANY SENDERS
Caution - checked TOO CLOSE
transceiver is not Group members
sending correctly. should maintain at
least 5m distance
during the transceiver
check.
The search strip width for the PIEPS PRO IPS is 80m as indicated on the display.
In the event of interfering signals, the PRO IPS will indicate a reduced search strip
width.
COARSE SEARCH
As soon as the beacon is receiving a signal, it will start to
vibrate and "beep", indicating the direction to the victim via
an arrow. Follow the direction indication quickly and see if
the distance value decreases.
If the distance reading increases, you are moving in the
wrong direction. In this case, the displayed arrowhead
will point towards you, instructing you to turn around.
When the distance to the buried victim is below 10m, the
direction arrow changes to outlines only, as a reminder to
reduce the search speed.
Distance and direction
Turn around 180°
Distance < 10m
25