Beurer IL 60 Instrucciones De Uso página 17

10. WHAT IF THERE ARE PROBLEMS?
Problem Possible cause
Infrared lamp
ON/OFF switch
does not
was not pressed
illuminate
No power
Infrared lamp burn
time exceeded
After replacing
the infrared lamp,
the new infrared
lamp was not fitted
correctly
Infrared lamp Safety switch-off
shuts off during due to overheating
operation protection
although timer
has not yet
elapsed
11. DISPOSAL
For environmental reasons, do not dispose of the de-
vice in household waste at the end of its service life.
Dispose of the device at a suitable local collection or
recycling point in your country. Observe the local reg-
ulations for material disposal. Dispose of the device
in accordance with EC Directive Waste Electrical and Electronic
Equipment (WEEE). If you have any questions, please contact the
local authorities responsible for waste disposal. You can obtain
the location of collection points for old devices from the local or
municipal authorities, local waste disposal companies or your re-
tailer, for example.
12. TECHNICAL SPECIFICATIONS
12.1 Infrared heat lamp
Mains connection AC 220 V – 230 V / 50 – 60 Hz
Power consump- 300 W
tion
Risk group RG2, medium risk group
Timer Programmable from 1 to 15 minutes in
minute intervals
Max. irradiation < 3200 W/m
intensity according
to EN 62471
Dimensions 225 x 288 x 195 mm
(W x H x D)
Weight Approx. 1.3 kg
Operating condi- Temperature: +5°C to +35°C
tions Relative humidity: 15% – 93%
Ambient pressure: 700 hPa – 1060 hPa
Storage and Temperature: -25°C to +70°C
transportation Relative humidity: ≤ 93%
conditions
Emitted infrared IRA + IRB / 780 – 3000 nm
wavelength range
Protection class II
Solution
Press the ON/OFF
5
button 5
Plug the mains
plug into the socket
correctly
The infrared lamp
is faulty. Contact
Customer Services or
your retailer
Check that the new
infrared lamp has
been fitted correctly
as described in
Chapter 8.2
Allow the device
to cool down and
restart it.
2
Expected burn time 1500 hours
of light source
Fuse Type H 4AT/250V
Safety distance to 13 cm
the eyes
Expected service Information on the service life of the
life of the device product can be found on the homepage
IP protection class IP 20
Spectral irradiation intensity
12.2 Protective eyewear
Model EP 02
Protection level 4-2.5 BEU 1 S - 166 S CE according to
EN 171:2002
Protective eyewear 4-2.5 BEU 1 S - 166 S CE
designation The code for the lenses is comprised of the
following:
- Initial number for IR protection filter (1st
part of code)
- Protection level number (2nd part of code)
- Manufacturer's marking (3rd part of code)
- 1 describes the optical class of the glass-
es (4th part of code)
- S describes increased strength (5th part
of code)
- 166 is the normative basis (6th part of
code)
- CE mark (7th part of code)
Light transmission Max. 29.1%
level Min. 17.8%
Maximum average 780 – 1400 nm: 2.9%
spectral transmit- 780 – 2000 nm: 32.3%
tance value with
infrared
Notified body:
ECS European Certification Service GmbH
Hüttfeldstraße 50
73430 Aalen, Germany
Identification number: 1883
EU declaration of conformity:
https://www.beurer.com/web/we-landingpages/de/cedeclaratio-
nofconformity.php
The batch number is located on the device.
17
Wavelength/nm