Base Settings - Amplicomms BigTel 1480 Manual De Instrucciones

- Auto answer: with this function activated, an incoming call
is accepted directly when you take the handset from the
base station - you do not need to press any key.
- Memory Keys: Select one of the direct dial keys from the
list (M1 / M2), press
red on this key.
- Register handset: select a new base station, enter the PIN
of the new base station and perform the necessary steps at
the base station.
- De-register: Enter the PIN of the base station and select the
handset that you want to de-register. Answer the query
with
- Handset reset: You can reset the handset to delivery state.
Enter the PIN (in delivery state "0000") and answer the
query with

Base settings

1. In idle state press the menu key
2. Select Settings and press
3. Select Base settings and press
- Ringer: select Ringtone and select the desired melody
- or -
select Ringer volume and select the volume.
- Dial mode: the standard dialling mode for analogue pho-
nes is "Tone". On some older phone systems the dialling
mode must be set to "Pulse". Please see your phone sy-
stem's user guide for more information.
- System PIN: in delivery state, the system PIN is set to
"0000".
- Base reset: you can reset the base station to delivery state.
Enter the PIN (in delivery state "0000") and answer the
query with.
36
Helpline 0844 800 6503 (See page 52 for costs and hours of operation)
.
.
.
and enter the number to be sto-
.
.
.