MELICONI HP FLASH EVO Instrucciones De Uso página 17

• Volume control: in music or talk mode, briefly press the VOLUME - [3] button to decrease the volume;
to increase the volume, briefly press the VOLUME + [1] button (a high-pitched tone informs you that you
have reached maximum volume).
• Change track: in music mode, press and hold the VOLUME + [1] button for 2 seconds to skip to the next
track, or press and hold the VOLUME - [2] button for 2 seconds to skip to a previous track
• Pause / Play: In music mode, during audio playback, briefly press the Play/Pause [2] button to pause,
press again to resume playback of the current track.
• Answer / End calls: Briefly press the Play/Pause [2] button once to answer incoming calls or to end the
conversation
• Call Rejection: Press and hold the Play/Pause button [2] for 2 seconds to reject incoming calls
• Virtual Assistant: Press the Play/Pause button [2] for about three seconds, when released the virtual
assistant of your device will be called: Siri (for Apple systems) or Google Assistant (for Android systems)
• Last Number Redial: Press the Play/Pause [2] button twice in rapid sequence to redial the last number.
Listening to TV (and music) with audio cable
• Plug the audio cable into the AUX-IN headphone socket [6] to listen to TV using the cable.
• Attention: When inserting the audio cable into the AUX-IN socket all Bluetooth® functions will be
automatically switched off and the volume, pause and previous/next track controls disabled.
• This mode allows the headset to be used even when the battery is flat.
Pairing to 2 Bluetooth
• The HP FLASH EVO headset can be paired with 2 Bluetooth® devices at the same time. This function
is useful, for example, when you are connected to a TV and, at the same time, you want to keep your
smartphone also connected to receive phone calls via Bluetooth®.
Proceed as follows:
- Pair the headset with the TV (see section "Pairing the headset with the TV")
- Switch off the HP FLASH EVO headset
- Deactivate the Bluetooth of the first device
- Switch the HP FLASH EVO headset back on in PAIRING mode (see section "Pairing the headset with your
mobile phone")
- Check that Bluetooth® is active on the second device to be paired, then
pair the second device with the HP FLASH EVO headset as well.
Note: when the devices are switched off and then on, the automatic pairing of the HP FLASH EVO will take
place for ONE DEVICE ONLY; the second device must always be added manually following the previous
procedure.
The LED indicator [4] provides a useful indication of the headset's operating status through its colour and
flashing mode.
LED LAMP
BLUE/RED ALTERNATING
BLUE SLOW FLASHING
RED STEADY
BLUE STEADY
Using the music and call controls
LED Indicator Light
Bluetooth® pairing: Red and blue lights flash alternately
Connecting to a device / Audio playback via Bluetooth®:
devices simultaneously
®
STATUS
Blue LED flashes slowly (every 5s)
Battery charging in progress
Charging completed
17