Publicidad
Idiomas disponibles
Idiomas disponibles
4. Set-up and Assembly
Starting the Calf Mechansim
1. Plug the cable and the air line of the calf mechanism into the respective connector on the front of the steel
frame (Figure 1).
2. After connecting, open the cover of the bracket on both sides of the steel frame (Figure 2).
3. Lift the calf mechanism and put it into the holder. Close the cover and affix it with two M4 screws (Figure 3).
Installing the Touch Screen Bracket
1. Align the bracket on the mounting device, the right armrest, and affix it with an M5 screw (Figure 1).
2. Put the cover cap in place and press it down firmly (Figure 2).
3. After assembly, carefully wiggle the bracket to check that it is firmly installed. The bracket is now fully assem-
bled (Figure 3).
Fig. 2
67
Publicidad
