Publicidad
Idiomas disponibles
Idiomas disponibles
3. The display will now show the following screen
4. Select List by pressing the ▼ key. The list can then be scrolled from 0
to 9 Nameplate values by using the ▼ or ▲ key. Select the desired
Nameplate by pressing ENTER. The display will return to Setup
Nameplate.
5.
Press ENTER, then Yes (▼) on
6. Select Edit by pressing the ▼ key. The values in the Present
Nameplate can be edited digit by digit by selecting each digit with the
▼ or ▲ and then pressing the ENTER key. When the last digit on the
Secondary is selected, the display returns to Setup Nameplate
NOTE:
• Selecting one transformer from the list will replace the values in the
Present Nameplate immediately. The values can then be changed in
the Edit mode if needed..
• Selecting Edit will allow the user to modify the values in the Present
Nameplate.
• The Edit process changes the values in the Present Nameplate only.
The values previously stored would remain the same. The stored List
values can only be changed in the software.
Enable.
22
Publicidad
