GE GFDS175 Manual Del Propietário página 13

Installation Instructions
[_] MOVE STRIKE BRACKET (cont.)
B. Switch the strike bracket and its cover to the
opposite side by removing the screws. Reinstall
both on the opposite side.
%
A.
REINSTALL DOOR ASSEMBLY
Install the door on the dryer. To ease this step,
the hinge has keyholes that allow a partially
fastened screw to be used as a hook.
Partially fasten a screw to the uppermost screw
hole. Hook the door on the partially fastened
screw.
Fasten the hinge by installing the other 3 screws
and tightening the partially fastened screw
above.
First partially install
top hinge screw in
dryer and hang door
from it
Then secure with
screws
Bo Align the outer ring in the door and fasten the 6
tapping screws located around the perimeter of
the door outlining the gasket.
13