OZ Lifting Products WHEEL BASE OZWB Serie Manual Del Operador página 16

OPERATION
Crane Pre-Installation
Check for damage during shipment. Do not install or use a damaged product. Be sure to maintain records of product
information and contact your OZ Lifting Products, LLC ® dealer with any problems that arise. Refer to applicable codes
and regulations before installing equipment. Contact a qualifi ed professional to obtain structure and foundation
specifi cations for product mounting.
Before installing, select a location where the crane is:
• Visible throughout its entire operation.
• Free of traffi c and any possible operational interference.
• Positioned so the operator is clear of both the load and the path of the wire cable.
• Accessible for maintenance.
• On a strong, level foundation, that can properly support it under all conditions.
• Removed from any corrosive, fl ammable, explosive, or potentially damaging materials.
Inspect the crane to assure there are no missing or damaged parts. Do not discard the crane's shipping containers as
®
they can be reused if the crane needs to be repackaged. Contact your OZ Lifting Products, LLC dealer if any problems
arise.
Assure that all components, including the pin that the load sheave rides on, are properly lubricated before assembling.
Refer to Cleaning & Lubricating the Crane Instructions on page 31.
During assembly, perform an inspection of all components and resolve any issues. This will provide a benchmark
comparison for later inspections.
16 Wheel Base Operator's Manual • OZ Lifting Products, LLC ® • 1/2024