OZ Lifting Products WHEEL BASE OZWB Serie Manual Del Operador página 23

Moving The Load
1. Make sure the load is securely attached and balanced before lifting the load slowly and smoothly.
2. Unlock the rear caster wheels at the rear of the Wheel Base.
3. Make sure the load is secured close to the fl oor and tied off to the mast and the legs to prevent it from swinging.
CORRECT LOAD LIFT
secure load
to prevent
turning or
swinging
WARNING
4. Slowly and smoothly pull/push the handle of the Wheel Base to move the load.
5. Do not use powered devices to push or pull the Wheel Base. Always move it by hand.
approved li ing
device or sling
Figure 11
Always move the load slowly and smoothly, especially when making turns.
Wheel Base Operator's Manual • OZ Lifting Products, LLC
OPERATION
INCORRECT LOAD LIFT
swinging load
® • 1/2024
obstruc on
23