Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Installing The Crane Onto The Wheel Base
NOTE: Installing the tab into the slot on the pedestal base bracket secures the mast to the base to prevent the
crane from rotating and possibly tipping under load.
1. Assemble the crane with the instructions in the crane operator's manual.
2. Once the crane assembly is complete, install the crane into the pedestal base on the Wheel Base. The crane can also
be assembled as individual parts onto the Wheel Base if it has not been previously assembled.
3. Make sure the crane boom and the Wheel Base legs are parallel to each other.
4. Install the locking collar system by inserting the U-bolts provided around the tubes of the mast and pedestal base.
5. Place the locking collar with the movable tab onto the mast of the crane and torque to twenty (20) foot-pounds.
6. Place the other locking collar onto the pedestal base tube and torque to twenty (20) foot-pounds.
7. Make sure both locking collars align and tab can lock into the mating slot when the crane is facing forward with the lifting
hook between the Wheel Base legs.
8. Center the load low between the two front wheels of the Wheel Base.
WARNING
18
Failure to install the tab into the slot on the pedestal base bracket may result in the
crane tipping under load.
Wheel Base Operator's Manual • OZ Lifting Products, LLC
Figure 8
®
• 1/2024
Publicidad
