Connecting The Gas Cylinder; Safety Notice; Required Tools/Auxiliary Materials; Assembly Process - Enders POLO 2.0 Manual De Uso

Ocultar thumbs Ver también para POLO 2.0:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH

CONNECTING THE GAS CYLINDER

SAFETY NOTICE

RISK OF FIRE AND EXPLOSION
!
The gas grill can only be operated with a
Q
pressure regulator. Also read and observe
the assembly instructions and instructions
for use, which are separately enclosed with
the pressure regulator.
The gas hose may have to be replaced if
Q
respective national regulations or the lifetime
of the hose line require this.
Gas hose and pressure regulator must be
Q
replaced at regular intervals. (For this, please
refer to chapter Cleaning/Servicing.)
Get information at a specialist shop when
Q
purchasing or renting gas cylinders.
Make sure that there are no sources of
Q

REQUIRED TOOLS/AUXILIARY MATERIALS

ASSEMBLY PROCESS

EN 16436-2
(Not included)
JUMBO REGULATOR - Gas connection
DIN EN 16129 (Not included)
ignition, open fire or the like in the vicinity,
when connecting or replacing the gas
cylinder.
Make sure that the gas hose does not have a
Q
kink in it or is chafed and that its entire length
is accessible.
After installing the gas cylinder, please check
Q
all connection points for leak tightness using
a commercially available leak detection spray
or soapy water. If there are no leaks, clean the
connections with water after the inspection.
Checking for leaks with an open flame is
Q
strictly prohibited!
6

Publicidad

Tabla de contenido
loading

Productos relacionados para Enders POLO 2.0

Este manual también es adecuado para:

546033

Tabla de contenido