Publicidad
Idiomas disponibles
Idiomas disponibles
• Clean all parts of the product before first use as
described in the chapter "Cleaning".
• The product may emit a slight smell when it is first
used. This is entirely safe and harmless. Ensure there is
adequate ventilation in the room.
• Always hold onto the handle
5.1 Preparation
1. Make sure your hair is clean, dry and free of styling products
(except special products that promote hair straightening).
2. Thoroughly comb your hair so that there are no knots in it.
3. Separate your hair into horizontal sections. Each section should
be around the width and thickness of a heating plate
4. Pin or clip the sections you are not working on out of the way.
5.2 Setting up the product
1. Connect the plug of the mains cord
socket.
2. Press and hold the on/off button ( )
product.
The product heats up to the default operating temperature
(120 °C/240 °F). The change in temperature shows in the
temperature indicator
3. If necessary, press both temperature buttons (+/–)
same time to change the temperature unit (°C/°F).
The temperature unit icon
4. Press the temperature buttons (+/–) to select another operating
temperature between 120 and 230 °C (240 and 450 °F)
(12 settings).
The product heats up or cools down to the selected operating
temperature. The change in temperature shows in the
temperature indicator.
See below for recommended settings. If in doubt, start with a
lower temperature and increase the temperature as necessary.
Temperature
120–150 °C/240–300 °F
150–190 °C/300–370 °F
190–230 °C/370–450 °F
4
6
3
in the display
10
shows your current selection.
12
Hair type
Fine, fragile or damaged hair
Normal hair
Coarse or curly hair
when using the product.
.
1
to an easily accessible
to turn on the
.
9
at the
2
EN
12
Publicidad
