Straightening Your Hair; After Use - Silk’n SILKYSTRAIGHT HCA03 Manual De Usuario

5. Wait until the selected operating temperature stays lit in the
EN
temperature indicator.
This indicates that the product has reached the required
operating temperature and is ready for use.
6. If necessary, press the on/off button ( ) twice consecutively to
lock the temperature buttons (+/–).
This prevents accidental change of operating temperature
during use.
The lock icon ( )
To cancel this function, press the on/off button ( ) twice
consecutively.

5.3 Straightening your hair

1. Properly prepare your hair and set up the product (see the
previous chapters).
2. Take a hair section and pull it taut by holding its end tightly
between your index and middle fingers of the hand that is not
holding the product.
3. Clamp the hair section near the root by pressing the heating
plates
4. Gently glide the heating plates downwards from the root to
the tip of the hair section (see Fig. B).
The infrared outlet
activated. The ion icon
The infrared light enables deeper and even heat penetration
and repairs hair scales by locking in your hair's natural moisture
to prevent overdrying.
The negative ions seal the hair cuticles and help to reduce frizz
and splitting.
5. Proceed in the same way for every hair section.

5.4 After use

1. When done, press and hold the on/off button ( )
off the product.
The product remembers the last operating temperature for
next use.
The product also automatically turns itself off after 45 minutes
without pressing any buttons. This is a safety feature and is not
intended to be a replacement for the on/off button ( ).
2. Unplug the product and place it on a heat-resistant surface to
allow it to completely cool down before cleaning or storage.
13
shows when this function is activated.
11
together.
1
7
and ion generator
in the display
13
are also
8
illuminates.
9
to turn
3