Descargar Imprimir esta página

BGS technic 8286 Manual página 6

Ocultar thumbs Ver también para 8286:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

SAFETY INFORMATIONS
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage and personal injuries.
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc..
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information.
REMOVING
The usage of this special clutch tool is basic also to dismount SAC clutches. In fact if we try to
dismount a SAC clutch, the clutch will adjust, causing problems during mounting operations, have a
shorter life and cause a lot of vibrations. Follow these instructions:
Mount the handle into the main threaded shaft.
Unscrew the 3 of 6 screws at 120°
(or 4 of 8 screws at 90°)
Mount the suitable screws M6 or M7 or M8
(legs) supplied in this set.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed

Publicidad

loading