Publicidad
Idiomas disponibles
Idiomas disponibles
Using a USB device and/or an HDMI
device
Installation of the USB Type-C extension cable
and/or an HDMI cable (HDMI Type-D or Micro-
HDMI) (not supplied) is required before use.
1
Connect the USB Type-C extension cable
to the USB port and/or an HDMI cable (not
supplied) to the HDMI terminal at the back
panel of the unit.
2
Pass the cable tie through the cable
holder, then tie cable tie around the USB
Type-C extension cable and/or HDMI
cable (not supplied).
The USB Type-C extension cable and HDMI
cable (not supplied) are secured to the unit.
* HDMI cable (HDMI Type-D or Micro-HDMI) (not
supplied)
3
Connect the installed USB Type-C extension
cable to a USB device and/or HDMI cable
to an HDMI device.
4
Press HOME, then touch [USB] or [HDMI].
Installation
Before installing the unit, remove the mounting
sleeve from the unit.
1
*
• Before installing, make sure the catches on both
• For Japanese cars, see "Mounting the unit in a
1
Removing the mounting sleeve
Insert both release keys until they click,
and pull down the mounting sleeve , then
pull up the unit to separate.
Face the hook inwards.
Mounting the unit in the dashboard
sides of the mounting sleeve are bent inwards
3.5 mm (
5
/
in).
32
Japanese car" (page 16).
Position the mounting sleeve inside the
dashboard, then bend the claws outward
for a tight fit.
Larger than
Catch
182 mm (7
1
/
Larger than
111 mm (4
3
/
in)
8
in)
4
15
GB
Publicidad
