Basics; Getting Started; Cancel The Demonstration; Set The Clock And Date - JVC KD-T915BTS Manual De Instrucciones

Basics

Remote control (RM-RK52)
• For KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS/KD-T710BT/
KD-TD71BT:
This unit can be remotely controlled with an optionally purchased remote
control.
• For KD-SR86BT:
Remote control functions are not available.
Remote sensor (Do not expose to bright sunlight.)
Pull out the insulation sheet
when using for the first time.
How to replace the battery
To On the remote control
Adjust the volume Press VOL + or VOL – .
• Press and hold VOL + to continuously increase
the volume to 15.
Press d to mute the sound or pause playback.
• Press again to cancel. The volume level returns to
the previous level before muting or pause.
Select a source Press SOURCE repeatedly.
(supplied for KD-T711BT)

Getting Started

1

Cancel the demonstration

When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES], see page 6), the display shows: "CANCEL DEMO"
"VOLUME KNOB"
1 Press the volume knob.
[YES] is selected for the initial setup.
2
Press the volume knob again.
"DEMO OFF" appears.
2

Set the clock and date

1
Press and hold .
2 Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Set the time in the order of "Hour"
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6 Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date
7
Turn the volume knob to select [DATE SET], then press the knob.
8
Turn the volume knob to make the settings, then press the knob.
Set the date in the order of "Day"
"PRESS"
"Minute".
"Month" "Year".
ENGLISH
5