Brandt BFV 1508 Manual De Instrucciones página 12

Programme sequence
The programme sequence indicator
shows you what stage the current wash-
ing programme is at.
Start
programme selector, the indicator light
will come on to show that the machiné is
only be shown once the start button has
cator light will come on to show that the
door is now locked.
Delay timer
the starting time of the washing cycle, the
programme sequence indicator will show
in the
'delay timer' section how much
time remains until the preselected pro-
Pre-wash LLJ
If you have selected the additional func-
tion 'pre-wash', you will see the pro-
gramme sequence indicator pass through
this section, if you have not selected pre-
Main wash 8
dicator depends on which programme
has been selected and also on which addi-
tional functions have been selected.
The higher the temperature, the longer
the duration of the main wash.
The 'E-saving' additional function also has
the effect of prolonging the main wash,
the effect of reducing the duration of the
main wash.
Rinsing 883
pends on the number of rinsing cycles
and the rinsing process will therefore take
longer if the 'extra rinsing' function is
selected.
The machine automatically includes an
extra rinse cycle if too much washing
number of rinsing cycles is not sufficient
The programme sequence indicator will
indicate 'rinse' if you select 'conditioning
rinse' as a special programme on the pro-
gramme selector switch.
Rinse hold Ü
The programme sequence is interrupted
at this point if the 'rinse:hold' button has
washing programme, you must carry out
any of the following:
speed
2. Set the programme selector to 'pump'.
3. Set the programme selector switch to
'spin' and select the spin speed on the
spin speed selector switch.
4. Set the programme selector switch to
on the spin speed selector switch.
13
STOP
td_/.
ts: /
\ \-1
]LLI
l!!J