Publicidad
EN.
GENERAL DIAGRAM
a. Control interface
b. Heating tank
c. Adapter ring
CONTROL INTERFACE
1. Steam heating
2. Bain-marie heating
3. Heating time
4. OZ/g setting
FOR USE AT HOME:
• Electric power supply: 120 V - 60 Hz.
• Power: 500 W.
• Speed: 2 minutes 40 seconds for a 9 fl oz (250 ml)
baby bottle.
2 minutes for a 8.8 oz (250 g) baby food jar.
• Maximum width of baby bottles: 3.15" (80 mm).
• Minimum heating time: 1 minute 20 seconds**
** for heating a baby bottle containing 2 fl oz (60 ml) of water at room temperature from 68 °F (20 °C) to 95 °F (35 °C).
All the Duo Smart Warmer programmes have been set using plastic baby bottles. If you use glass bottles, reduce
the time by 20 % (e.g. for a 2 fl oz / 60 ml bottles, reduce 1 min 25 seconds to 1 min 10 seconds).
Warning: white marks may be visible as a result of the Quality Control checks.
Wipe the product with a damp cloth before using for the first time (except the electric plug).
Never immerse the electric base in water.
If you make a mistake when programming your appliance, you cannot go back.
Re-start the product (ON/OFF) or press OK for 5 seconds, then press one of the two arrows to go back to zero.
OFF
Turn on the Duo Smart Warmer by pressing the right or left button on the back to activate:
HOME MODE
Do not use the car adaptor for the home.
Simply plug the product into the mains socket using the power cable.
CAR MODE
Stop the vehicle and let the engine running. To ensure the product works correctly, plug the car adapter (e) into the socket
on the product (f) and then into your car's cigarette lighter. Bain-marie heating is not recommended for the car as the heating
time is very long.
Be sure to place the Duo Smart Warmer on a flat surface to avoid the contents spilling out.
8
d. Basket
e. Cigarette lighter adapter
f. Socket for cigarette lighter adapter
5. Temperature setting
6. OK confirmation button
7. Programmable start
TECHNICAL FEATURES
Universal: for all types of baby bottles and baby food jars.
TECHNICAL SPECIFICATIONS
STARTING THE DUO SMART WARMER
DUO SMART WARMER
g. Mode switch (home/car) /
h. Power cable
8. Arrows for changing the heating
9. Low water level indicator
FOR USE IN THE CAR:
• Electric power supply: 12 V DC.
• Power: 100 W.
• Energy consumption during operation:
500 W (home mode) / 100 W (car mode)
• Energy consumption on standby: < 0.5 W
OFF button
mode, OZ/g and temperatures
OFF
Publicidad
