Publicidad
Duo smart warmer
Duo smart warmer
OZ
OZ
• If there is not enough water, 5 beeps will sound. Fill the tank according to the required heating method and wait 10 mins.
• Cancel the beeps by pressing the OK button.
• Press OK again to restart the heating process.
• Change the water every 24 hours to prevent the build-up of bacteria.
HEATING BABY BOTTLES, CONTAINERS AND BREAST MILK POUCHES
• Whether you are using the steam heating method (1) (baby bottles/baby food jars) or bain-marie method (2) (breast milk/
defrosting), you will need to use the arrows (8) to specify:
: the amount of milk/food in your container (2 / 3 / 4 / 6 or 9 - 60 / 90 / 120 / 180 or 250) (4).
: the temperature of the container (5).
= room temperature: 68 °F (20 °C).
= temperature having been refrigerated: 39.2 °F (4 °C).
= frozen temperature approx. -0.4 °F (-18 °C) (available for bain-marie mode only).
: heating time (this is pre-set according to the quantity and required temperature, but you can change it at any time) (3).
Caution: the steam heating mode may cause splashes. Move away from the bottle warmer to avoid any risk of
scalding. Also always check the temperature of the milk/food before serving it to your child. Wait 15 mins between
each bottle or reduce your heating time.
Note: if the quantity to be heated is not pre-programmed, we recommend choosing the lower quantity
to avoid overheating.
4 fl oz - 120 ml
1.5 fl oz - 45 ml
«BIP» x 5
DUO SMART WARMER
FILLING THE TANK
• Place warm water (around 68 ° F - 20 °C) into the tank
according to the required heating method and the following
graduation marks in the tank:
: steam (1.5 fl oz / 45 ml max)
: bain-marie (4 fl oz / 120 ml max)
Exception
Baby food jars containing less than 4 fl oz (120 ml): fill to the level
of the contents in the jar and disregard the graduation marks.
10 min
Duo smart warmer
Duo smart warmer
OZ
OZ
BIP
Duo smart warmer
Duo smart warmer
OZ
OZ
9
Publicidad
