Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
Stapler operates, but no staple is
driven.
Weak drive.
Slow to cycle.
Drives too deep.
Skipping staples.
Intermittent feed.
Staples jam. Driven staple is bent.
CHECK METHOD
Magazine is dirty.
Check for a jam.
Driver blade worn or damaged?
Feed spring weakened or damaged?
Staple feeder damaged?
Check for proper staples.
Check position of stapling depth
adjustment adjuster.
Driver blade worn?
Damaged internal electronics.
Check position of stapling depth
adjustment adjuster.
Check for proper staples.
Staple feeder damaged?
Feed spring weakened or damaged?
Driver blade worn or damaged?
Check for proper staples.
Driver blade worn or damaged?
CORRECTION
Blow and wipe clean the magazine.
Clear a jam (See page 21).
Contact metabo HPT for inspection.
Replace feed spring.
Replace staple feeder.
Use only recommended staples.
Readjust according to page 20.
Contact metabo HPT for inspection.
Contact metabo HPT for inspection.
Readjust according to page 20.
Use only recommended staples.
Replace staple feeder.
Replace feed spring.
Contact metabo HPT for inspection.
Use only recommended staples.
Contact metabo HPT for inspection.
English
25
Publicidad
